Camping would be fun indeed, but a hot summer day might spoil the whole mood. Especially if the camping land has high humidity, the nights will be hot and uncomfortable. Air conditioning the tent might be a welcoming idea but “how to air condition a tent?” “What will be the cost to air condition a tent?”
As you have come across this article, I believe you are looking for the best ways to air condition a tent. So, don’t dilly dally & check our premium tricks now as we have highlighted a detailed discussion on “how to air-condition a tent.” So, be ready with equipment and start air conditioning the tent for a fun camping trip!
Contents
How To Air Condition A Tent
In order to assist decorators in air conditioning a camping tent, we have discussed step by step procedure along with their expenses. So, let’s jump in for the details now!
Decide The Power Source For The AC:
While discussing “How to air condition a tent?”, The decorator must consider the available power source for air-conditioning. Will he draw power from an adjacent building by cables?
- Professional decorators prefer generators to provide adequate electricity to operate the air cooler.
- Determine cable length beforehand for the current draw.
- If he chooses a lengthy cable, he will also need a big one to balance the voltage and current draw.
- We would advise utilizing cable ramps and diffusers for safety and easy installation.
Cost:
- As Purchasing a generator will be super costly ($400 minimum), we would advise using the one from the adjacent building.
- The generator power cable cost will vary as per length—a 25 ft. Power cable may cost $50 approximately.
Gather up the equipment
After determining the power supply, you will need the following materials to complete the whole procedure.
- Window mounted AC (5000 BTU)
- Ripstop Nylon (two yards)
- Fabric glue
- Bungee cords.
Cost:
- The cost of the AC may vary depending on brands & models. Generally, a 5000 BTU 450 W AC will cost around $41.
- The nylon may cost $14 approximately.
- A decorator can purchase highly adhesive fabric glue from any local shop by paying only $6 to $10.
- Bungee cords are pretty cheap (around $3 – $5)
Make A Plan
- Measure its size and mark that on the nylon and tent with a marker.
- Try to adhere the Ripstop fabric with the outside tent with some fabric glue.
- While creating the ducting part, leave some extra inches than A/C’s actual measurement for proper fitting.
- As the decorator needs to attach the duct system with the tent, the other end of the duct will need to be within the hole.
Take The First Step:
- As a first step of “how to air condition your tent,” you need to clean the tent.
- After cleaning the tent, decide the location & height to place the A/C unit.
- Never choose a place where you have to cut through the moisture barrier.
Cut The Materials & Place The AC:
- measure the A/C unit & mark the measurements on the nylon fabric. Both spray glue or beacon fabric glues are suitable for adhering the nylon with the tent’s exterior.
- We would advise collapsing the tent first to reduce wrinkles while gluing.
- Once the glue has dried up, the decorator can make the hole for A/C unit placement.
- After preparing the hole, place the Air conditioner perfectly.
- If you had a tent with an air conditioner slot, the installation procedure would have been super easy. In that case, you have to fit the A/C within the slot perfectly.
Create Connection Tubes:
- Measuring the circumferential distance around the A/C unit is vital to determine the length of the tunnel.
- Though determination of tunnel length is basically a personal choice, I prefer lengthy tunnel fabric as longer ones ease up cutting down and installation.
- We prefer longer tunnel fiber as 2 to 3 inches of fiber is used during gluing tubes together. 2 to 3 inches overlap will strengthen the bond. However, don’t ever glue the tube’s bottom.
- Now check all the corners of the hole and apply flaps to connect the tunnel to the tent. A 3 to 4 inches flap will be enough to secure the tunnel tightly to the tent.
- After binding the tunnel with the tent, apply bungee cords to adhere to the whole tunnel system with the A/C unit. At last, roll the tunnel system up for proper & compact fittings. It is better to stretch the tunnel as saggy tunnel fibers will reduce airflow.
Once your A/C is set, it’s a suitable tent for hot weather. It will take around two minutes to cool down the temperature of the tent. An air-conditioned camping tent will be super cool, comfy and will ensure a good sleep all night.
Frequently Asked Questions
Can you put a portable air conditioner in a tent?
Yes, a portable air conditioner can be a great choice to cool down the tent. However, it should be powerful & efficient enough to meet up the cooling requirements.
How can I keep my tent cool without electricity?
As you have searched “How to cool a tent without electricity,” I believe you don’t want to invest in expensive air conditioning and camping generators. Thus, follow the three tricks below to keep the tent cool naturally.
- Try to place the tent in natural shades like trees, hills, or buildings. Riverside camping will also be an incredible choice as a tiny breeze will provide an excellent & cold effect on a hot summer day.
- Install the tent after the sun goes down.
- It’s an incredible idea to cover up the tent with some space blanket if the natural shade is not available.
How do I cool my outdoor tent?
In order to keep the outdoor tent cool:
- Choose a tent with high mesh components.
- Utilize reflective sun shades.
- Place the tent on the shaded ground & don’t assemble it during the day.
- Purchase a portable fan or set up a tent A/C.
Conclusion
I bet you don’t want to spoil the camping trip on a hot summer day. That’s why most people prefer air conditioning during camping but how to air-condition a tent? This article has discussed every detail of A/C installation in the tent along with its expenses. So, will you choose to cool down the tent or want to be fries inside the hot tent?